83652. In a unit type body (frameless body) design, the sheet metal parts are welded together, forming a frame work to which outer skin is attached.
83653. The torque available at the contact between driving wheels and road is known as
83654. A traction control system (TCS) in automobiles controls the
83655. In radial tyres
83656. The oil pump is driven by the
83657. In a spark plug, when the temperature of the central electrode exceeds a certain temperature, any carbon that has adhered will be burnt off, and the temperature at which this burning off carbon starts is referred to as the self cleaning temperature.
83658. The flywheel and the pressure plate bind the clutch disc between them so that the engine and the transmission can be engaged.
83659. The vehicle ride will be comfortable if
83660. The main function of intake manifold is that it
83661. Positive camber is used to compensate for wheels tilting inward due to the weight of the vehicle.
83662. In automobiles G.V.W. refers to
83663. The firing order for an in-line four cylinder I.C. engine is
83664. In a ventilated disc brake,
83665. The effect of having excess camber is
83666. If the air-fuel mixture in a spark ignition engine is too rich, then air-fuel ratio is about
83667. The advantage of double-wishbone suspension design is that a large amount of freedom is available for setting geometry and precise settings can be made for driving comfort and steerability,
83668. The co-efficient of rolling resistance for a truck weighing 63 500 N is 0.018. The rolling resistance to the truck is
83669. If the level of tension in the belt is too high, it can result in a loss of power or in bending of the rotating shaft or crankshaft.
83670. If the air-fuel mixture ignites before the spark takes place at spark plug, the condition is called
83671. The information provided by the oxygen (O2) sensor to the feedback control system is about the
83672. The diagram which shows the correct crank positions corresponding to the opening and closing of the valves, is known as
83673. The difference between DOT 3 and DOT 4 brake fluids is
83674. The battery is an electrochemical device, which means battery
83675. The operation of removing trapped air from the hydraulic braking system is known as
83676. The aluminium alloy is used in cylinder blocks because
83677. In a fuel injection system, the electronic control module (ECM) calculates the optimum fuel-injection volume for the engine condition based on the data received from the sensors, and injects this volume of fuel into the intake manifold at the optimum timing.
83678. The tilting of the front wheels away from the vertical, when viewed from the front of the car, is called
83679. The main function of the tread pattern on tyre is that
83680. The compression ratio in petrol engine is kept less than in Diesel engine because
83681. The most commonly used supplementary restraint system (SRS) component is
83682. The natural gas is compressed in a CNG cylinder at a pressure of
83683. The cetane rating of Diesel fuel is in the order of
83684. The air gap between the central electrode and ground (or side) electrode of a spark plug is around
83685. The cetane number of a Diesel fuel is a measure of
83686. The valve overlap in four stroke petrol engines is approximately
83687. The petrol engines are also known as
83688. Which of the following indicates a multigrade oil ?
83689. The coefficient of friction for the clutch facing is approximately
83690. The component that connects the steering rack to the knuckles is
83691. The painting of automobiles is done to
83692. The main task of a battery in automobiles is to
83693. The major purpose of an electronically-controlled automatic transmission is that this type of transmission
83694. The connecting rods are generally made of __________ shaped cross-section.
83695. The anti-knock property of compression ignition engine fuel can be improved by adding
83696. The calorific value of petrol is about
83697. The ball joints are used on the tie-rod ends, because they
83698. The air resistance to a car at 20 kmph is R. The air resistance at 40 kmph will be
83699. The size of engine cylinder is referred in terms of its
83700. The purpose of a cylinder head gasket is to
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use
Powered By:Omega Web Solutions