1. A mild steel bar of square cross-section 40 mm x 40 mm is 400 mm long. It is subjected to a longitudinal tensile stress of 440 N/mm2 and lateral compressive stress is 200 N/mm2 in perpendicular directions. E = 2 x 10-5 N/mm2, μ = 0.3. What is the approximate elongation of tht bar in the longitudinal direction ?





Write Comment

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Tags
Show Similar Question And Answers
QA->When the disposal is forwarded to record section what is to be obtained from record section by fair copy section:....
QA->WHICH PLANT HORMONE PROMOTE ROOT INITIATION AND CELL ELONGATION....
QA->How long does a train 110 metres long running at a speed of 36 km/hour take to cross a bridge of 132 metres in length?....
QA->The type of gears used for transmitting power between two-non intersecting perpendicular shafts is :....
QA->The college section and Gurukula Section were the divisions of:....
MCQ->A mild steel bar of square cross-section 40 mm x 40 mm is 400 mm long. It is subjected to a longitudinal tensile stress of 440 N/mm2 and lateral compressive stress is 200 N/mm2 in perpendicular directions. E = 2 x 10-5 N/mm2, μ = 0.3. What is the approximate elongation of tht bar in the longitudinal direction ?....
MCQ->A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2. These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2, the stresses developed are:....
MCQ-> Read the data given below and answer the questions based on it. There were 3 sections namely A, B, and C in a test. Out of three sections, 33 students passed in Section A. 34 students passed in Section B and 32 passed in Section C. 10 students passed in Section A and Section B. 9 passed in Section B and Section C, 8 passed in Section A and Section C. The number of students who passed each section alone was equal and was 21 for each section.The ratio of the number of students passed in one or more of the sections to the number of students who passed in Section 7 A alone is:
 ....
MCQ->A steel bar 10 mm x 10 mm cross section is subjected to an axial tensile load of 20 kN. If the length of bar is 1 m and E = 200 GPa, then elongation of the bar is ?....
MCQ->At a cross-section of a beam, the maximum compressive stress at top is 800 kg/cm2 and its maximum tensile stress at bottom is 200 kg/cm2. The depth of cross-section is 10 cm. The depth of the neutral axis from the top of the section is n. The n is equal to....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use
DMCA.com Protection Status Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions