1. The following operations are generally employed for tunnelling in hard rock. 1. Removing ground water, 2. Loading holes and firing the explosive3. Setting up and drilling4. Grouting and lining5. Removing muck6. Ventilation and removing explosion dustThe correct sequence is :





Write Comment

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Tags
Show Similar Question And Answers
QA->The correct sequence of missing letters in ba - a – aab:....
QA->Which is the correct sequence in terms of descending values of Albedo?....
QA->Whichbank is to shut its banking operations in India having given up on efforts tofind a buyer as the planned to reduce its international operations to 13countries?....
QA->In a positive crank case ventilation system , the blow by gases drawn from the crankcase is fed to the :....
QA->Multi-hole type diesel injectors are generally employed in :....
MCQ->The following operations are generally employed for tunnelling in hard rock. 1. Removing ground water, 2. Loading holes and firing the explosive3. Setting up and drilling4. Grouting and lining5. Removing muck6. Ventilation and removing explosion dustThe correct sequence is :....
MCQ->The following operations are required for tunnelling in rocky terrain :1. Removing the foul gases2. Marking the tunnel profile3. Setting up and drilling4. Checking misfire5. MuckingThe correct sequence is :....
MCQ->What is the correct sequence of the following events in rock tunnelling :1. Marking tunnel profile 2. Loading explosive and blasting3. Checking misfire 4. Muking5. Removing foul gas 6. Setting up and drilling7. GunnistingSelect the correct answer using the codes given below :....
MCQ->Consider the following statements with respect to tunnelling methods:1. Full face excavation is suitable for small size tunnel of short length in compact rock. It is not suitable in urban areas.2. Heading and Benching method is suitable for soft rock tunnelling of medium size.3. Drift method is suitable for large tunnels in difficult or incompetent rock.Which of the statements given above are correct ?....
MCQ->A ferry carries passengers to Rock of Vivekananda and back from Kanyakumari. The distance of Rock of Vivekananda from Kanyakumari is 100km. One day, the ferry started for Rock of Vivekananda with passengers on board, at a speed of 20 km per hour. After 90 minutes, the crew realized that there is a hole in the ferry and 15 gallons of sea water had already entered the ferry. Sea water is entering the ferry at the rate of 10 gallons per hour. It requires 60 gallons of water to sink the ferry. At what speed should the driver now drive the ferry so that it can reach the Rock of Vivekananda and return back to Kanyakumari just in time before the ferry sinks? (Current of the sea water from Rock of Vivekananda to Kanyakumari is 2km per hour.)....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use
DMCA.com Protection Status Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions