DIRECTIONS for the following questions:These questions are based on the situation given below: A robot moves on a graph sheet with x and y-axes. The robot is moved by feeding it with a sequence of instructions. The different instructions that can ?->(Show Answer!)

1. DIRECTIONS for the following questions:These questions are based on the situation given below: A robot moves on a graph sheet with x and y-axes. The robot is moved by feeding it with a sequence of instructions. The different instructions that can be used in moving it, and their meanings are: Instruction Meaning GOTO(x,y) move to point with coordinates (x, y) no matter where you are currently WALKX(P) Move parallel to the x-axis through a distance of p, in the positive direction if p is positive, and in the negative direction if p is negative WALKY(P) Move parallel to the y-axis through a distance of p, in the positive direction if p is positive, and in the negative direction if p is negative.The robot reaches point (6, 6) when a sequence of three instructions is executed, the first of which is a GOTO(x, y) instruction, the second is WALKX(2) and the third is WALKY(4). What are the values of x and y?

Write Comment

Comments

By: anil on 05 May 2019 02.31 am

Before, the third instruction, the point on which the robot is present is (6,2). Before, the second instruction, the point on which the robot is present is (4,2).
Hence, the values of x and y are 4 and 2 respectively.

Tags

Show Similar Question And Answers

QA->What is a graph is plotted taking °C along the Y-axis and of K along the X-axis?....

QA->Which is the correct sequence in terms of descending values of Albedo?....

QA->Which country moved to the top of the FIFA world ranking list for the first time on November 7, 2015 after overtaking Argentina and world champions Germany following their victories in last month"s European qualifiers?....

QA->CPU register that holds the address of the instructions to be executed next:....

QA->“Intensity of pressure at a point in a fluid at rest is same in all directions”, this law is :....

MCQ-> DIRECTIONS for the following questions:These questions are based on the situation given below: A robot moves on a graph sheet with x and y-axes. The robot is moved by feeding it with a sequence of instructions. The different instructions that can be used in moving it, and their meanings are: Instruction Meaning GOTO(x,y) move to point with coordinates (x, y) no matter where you are currently WALKX(P) Move parallel to the x-axis through a distance of p, in the positive direction if p is positive, and in the negative direction if p is negative WALKY(P) Move parallel to the y-axis through a distance of p, in the positive direction if p is positive, and in the negative direction if p is negative.The robot reaches point (6, 6) when a sequence of three instructions is executed, the first of which is a GOTO(x, y) instruction, the second is WALKX(2) and the third is WALKY(4). What are the values of x and y?
....

MCQ-> DI
rectI
ons: I
n the followI
ng passage there are blanks, each of whI
ch has been numbered. These numbers are prI
nted below the passage and agaI
nst each, fI
ve words/ phrases are suggested, one of whI
ch fI
ts the blank approprI
ately. FI
nd out the approprI
ate word/ phrase I
n each case.There I
s a consI
derable amount of research about the factors that make a company I
nnovate. So I
s I
t possI
ble to create an envI
ronment (I
) to I
nnovatI
on? ThI
s I
s a partI
cularly pertI
nent (I
I
) for I
ndI
a today. MassI
ve problems I
n health, educatI
on etc (I
I
I
) be solved usI
ng a conventI
onal Approach but (I
V) creatI
ve and I
nnovatI
ve solutI
ons that can ensure radI
cal change and (V). There are several factors I
n I
ndI
a's (VI
). Few countrI
es have the rI
ch dI
versI
ty that I
ndI
a or I
ts large, young populatI
on (VI
I
). WhI
le these (VI
I
I
) I
nnovatI
on polI
cy I
nterventI
ons certaI
n addI
tI
onal steps are also requI
red. These I
nclude (I
X) I
nvestment I
n research and development by (X) the government and the prI
vate sector, easy transfer of technology from the academI
c world etc. To fulfI
ll I
ts promI
se of beI
ng prosperous and to be at the forefront, I
ndI
a must be I
nnovatI
ve.I
....

MCQ-> Cells are the ultimate multi-taskers: they can switch on genes and carry out their orders, talk to each other, divide in two, and much more, all at the same time. But they couldn’t do any of these tricks without a power source to generate movement. The inside of a cell bustles with more traffic than Delhi roads, and, like all vehicles, the cell’s moving parts need engines. Physicists and biologists have looked ‘under the hood’ of the cell and laid out the nuts and bolts of molecular engines.The ability of such engines to convert chemical energy into motion is the envy nanotechnology researchers looking for ways to power molecule-sized devices. Medical researchers also want to understand how these engines work. Because these molecules are essential for cell division, scientists hope to shut down the rampant growth of cancer cells by deactivating certain motors. Improving motor-driven transport in nerve cells may also be helpful for treating diseases such as Alzheimer’s, Parkinson’s or ALS, also known as Lou Gehrig’s disease.We wouldn’t make it far in life without motor proteins. Our muscles wouldn’t contract. We couldn’t grow, because the growth process requires cells to duplicate their machinery and pull the copies apart. And our genes would be silent without the services of messenger RNA, which carries genetic instructions over to the cell’s protein-making factories. The movements that make these cellular activities possible occur along a complex network of threadlike fibers, or polymers, along which bundles of molecules travel like trams. The engines that power the cell’s freight are three families of proteins, called myosin, kinesin and dynein. For fuel, these proteins burn molecules of ATP, which cells make when they break down the carbohydrates and fats from the foods we eat. The energy from burning ATP causes changes in the proteins’ shape that allow them to heave themselves along the polymer track. The results are impressive: In one second, these molecules can travel between 50 and 100 times their own diameter. If a car with a five-foot-wide engine were as efficient, it would travel 170 to 340 kilometres per hour.Ronald Vale, a researcher at the Howard Hughes Medical Institute and the University of California at San Francisco, and Ronald Milligan of the Scripps Research Institute have realized a long-awaited goal by reconstructing the process by which myosin and kinesin move, almost down to the atom. The dynein motor, on the other hand, is still poorly understood. Myosin molecules, best known for their role in muscle contraction, form chains that lie between filaments of another protein called actin. Each myosin molecule has a tiny head that pokes out from the chain like oars from a canoe. Just as rowers propel their boat by stroking their oars through the water, the myosin molecules stick their heads into the actin and hoist themselves forward along the filament. While myosin moves along in short strokes, its cousin kinesin walks steadily along a different type of filament called a microtubule. Instead of using a projecting head as a lever, kinesin walks on two ‘legs’. Based on these differences, researchers used to think that myosin and kinesin were virtually unrelated. But newly discovered similarities in the motors’ ATP-processing machinery now suggest that they share a common ancestor — molecule. At this point, scientists can only speculate as to what type of primitive cell-like structure this ancestor occupied as it learned to burn ATP and use the energy to change shape. “We’ll never really know, because we can’t dig up the remains of ancient proteins, but that was probably a big evolutionary leap,” says Vale.On a slightly larger scale, loner cells like sperm or infectious bacteria are prime movers that resolutely push their way through to other cells. As L. Mahadevan and Paul Matsudaira of the Massachusetts Institute of Technology explain, the engines in this case are springs or ratchets that are clusters of molecules, rather than single proteins like myosin and kinesin. Researchers don’t yet fully understand these engines’ fueling process or the details of how they move, but the result is a force to be reckoned with. For example, one such engine is a spring-like stalk connecting a single-celled organism called a vorticellid to the leaf fragment it calls home. When exposed to calcium, the spring contracts, yanking the vorticellid down at speeds approaching three inches (eight centimetres) per second.Springs like this are coiled bundles of filaments that expand or contract in response to chemical cues. A wave of positively charged calcium ions, for example, neutralizes the negative charges that keep the filaments extended. Some sperm use spring-like engines made of actin filaments to shoot out a barb that penetrates the layers that surround an egg. And certain viruses use a similar apparatus to shoot their DNA into the host’s cell. Ratchets are also useful for moving whole cells, including some other sperm and pathogens. These engines are filaments that simply grow at one end, attracting chemical building blocks from nearby. Because the other end is anchored in place, the growing end pushes against any barrier that gets in its way.Both springs and ratchets are made up of small units that each move just slightly, but collectively produce a powerful movement. Ultimately, Mahadevan and Matsudaira hope to better understand just how these particles create an effect that seems to be so much more than the sum of its parts. Might such an understanding provide inspiration for ways to power artificial nano-sized devices in the future? “The short answer is absolutely,” says Mahadevan. “Biology has had a lot more time to evolve enormous richness in design for different organisms. Hopefully, studying these structures will not only improve our understanding of the biological world, it will also enable us to copy them, take apart their components and recreate them for other purpose.”According to the author, research on the power source of movement in cells can contribute to
....

MCQ-> Read the following passage carefully and answer the questions given below it. Certain words/phrases have been given in bold to help you locate them while answering some of the questions: In every religion, culture and civilization feeding the poor and hungry is considered one of the most noble deeds. However such large scale feeding will require huge investment both in resources and time. A better alternative is to create conditions by which proper wholesome food is available to all the rural poor at affordable price. Getting this done will be the biggest charity.Our work with the rural poor in villages of Western Maharashtra has shown that most of these people are landless laborers. After working the whole day in the fields in scorching sun they come home in the evening and have to cook for the whole family. The cooking is done on the most primitive chulha (wood stove) which results in tremendous indoor air pollution. Many of them also have no electricity so they use primitive and polluting kerosene lamps. World Health Organization (WHO) data has shown that about 300,000 deaths/ year in India can be directly attributed to indoor air pollution in such -nuts. At the same time this pollution results in many respiratory ailments and these people spend close Rs. 200-400 per month on medical bills. Besides the pollution, rural poor also eat very poor diet. They eat whatever is available daily at Public Distribution System (PDS) shops and most of the times these shops are out of rations. Thus they cook whatever is available. The hard work together with poor eating takes a heavy toll on their health. Besides this malnutrition also affects the physical and mental health of their children and may lead to creation of a whole generation of mentally challenged citizens. So I feel that the best way to provide adequate food for rural poor is by setting up rural restaurants on large scale. These restaurants will be similar to regular ones but for people below poverty line (BPL) they will provide meals at subsidized rates. These citizens will pay only Rs. 10 per meal and the rest, which is expected to be quite small, will come as a part of Government subsidy. With existing open market prices of vegetables and groceries average cost of simple meal for a family of four comes to Rs. 50 per meal or Rs. 12.50 per person per meal. If the PDS prices are taken for the groceries then the average cost will be Rs. 7.50 per person per meal. This makes the subsidy approximately Rs. 2.50 per person per meal only and hence quite small. The buying of meals could be by the use of UID (Aadhar) card by rural poor. The total cost should be Rs. 30 per day for three vegetarian meals of breakfast, lunch and dinner. The rural poor will get better nutrition and tasty food by eating in these restaurants. Besides the time saved can be used for resting and other gainful activities like teaching children. Since the food will not be cooked in huts, this strategy will result in less pollution in rural households. This will be beneficial for their health. Besides, women's chores will be reduced drastically. Another advantage of eating in these restaurants will be increased social interaction of rural poor since this could also become a meeting place. Eating in restaurants will also require fewer utensils in house and hence less expenditure. For other things like hot water for bath, making tea, boiling milk and cooking on holidays some utensils and fuel will be required. Our Institute NARI has developed an extremely efficient and environment-friendly stove which provides simultaneously both light and heat for cooking and hence may provide the necessary functions. Providing reasonably priced wholesome food is the basic aim and program of Government of India (GOI). This is the basis of their much touted food security program.However in 65years they have not been able to do so. Thus I feel a public private partnership can help in this. To help the restaurant owners the GOI or state Governments should provide them with soft loans and other line of credit for setting up such facilities. Corporate world can take this up as a part of their corporate social responsibility activity. Their participation will help ensure good quality restaurants and services. Besides the charitable work, this will also make good business sense. McDonald's-type restaurant systems for rural areas can be a good model to be set up for quality control both in terms of hygiene and in terms of quality of food material. However focus will be on availability of wholesome simple vegetarian food in these restaurants.More clientele (volumes) will make these restaurants economical. Existing models of dhabas, udipi type restaurants etc. can be used in this scheme. These restaurants may also be able to provide midday meals in rural schools. At present the midday meal program is faltering due to various reasons. Food coupons in western countries provide cheap food for poor. However quite a number of fast food restaurants in US do not accept them. Besides these coupons are most of the times used for non-food items, it will be mandatory for rural restaurants to accept payment via UID cards for BPL citizens. Existing soup kitchens, lagers and temple food are based on charity. For large scale rural use it should be based on good social enterprise business model. Cooking food in these restaurants will also result in much more efficient use of energy since energy/ kg of food cooked in households is greater than that in restaurants. The main thing however will be to reduce drastically the food wastage In these restaurants. Rural restaurants can also be forced to use clean fuels like LPG or locally produced biomass-based liquid fuels. This strategy is very difficult to enforce for individual households. Large scale employment generation in rural areas may result because of this activity. With an average norm of 30 people employed/ 100-chair restaurant, this program has the potential of generating about 20 million jobs permanently in rural areas. Besides the infrastructure development in setting up restaurants and establishing the food chain etc will help the local farmers and will create huge wealth generation in these areas. In the long run this strategy may provide better food security for rural poor than the existing one which is based on cheap food availability in PDS - a system which is prone to corruption and leakage.In accordance with the view expressed by the writer of this article, what is the biggest charity ?
....

MCQ-> The second plan to have to examine is that of giving to each person what she deserves. Many people, especially those who are comfortably off, think this is what happens at present: that the industrious and sober and thrifty are never in want, and that poverty is due to idleness, improvidence, drinking, betting, dishonesty, and bad character generally. They can point to the fact that a labour whose character is bad finds it more difficult to get employment than one whose character is good; that a farmer or country gentleman who gambles and bets heavily, and mortgages his land to live wastefully and extravagantly, is soon reduced to poverty; and that a man of business who is lazy and does not attend to it becomes bankrupt. But this proves nothing that you cannot eat your cake and have it too; it does not prove that your share of the cake was a fair one. It shows that certain vices make us rich. People who are hard, grasping, selfish, cruel, and always ready to take advantage of their neighbours, become very rich if they are clever enough not to overreach themselves. On the other hand, people who are generous, public spirited, friendly, and not always thinking of the main chance, stay poor when they are born poor unless they have extraordinary talents. Also as things are today, some are born poor and others are born with silver spoons in their mouths: that is to say, they are divided into rich and poor before they are old enough to have any character at all. The notion that our present system distributes wealth according to merit, even roughly, may be dismissed at once as ridiculous. Everyone can see that it generally has the contrary effect; it makes a few idle people very rich, and a great many hardworking people very poor.On this, intelligent Lady, your first thought may be that if wealth is not distributed according to merit, it ought to be; and that we should at once set to work to alter our laws so that in future the good people shall be rich in proportion to their goodness and the bad people poor in proportion to their badness. There are several objections to this; but the very first one settles the question for good and all. It is, that the proposal is impossible and impractical. How are you going to measure anyone's merit in money? Choose any pair of human beings you like, male or female, and see whether you can decide how much each of them should have on her or his merits. If you live in the country, take the village blacksmith and the village clergyman, or the village washerwoman and the village schoolmistress, to begin with. At present, the clergyman often gets less pay than the blacksmith; it is only in some villages he gets more. But never mind what they get at present: you are trying whether you can set up a new order of things in which each will get what he deserves. You need not fix a sum of money for them: all you have to do is to settle the proportion between them. Is the blacksmith to have as much as the clergyman? Or twice as much as the clergyman? Or half as much as the clergyman? Or how much more or less? It is no use saying that one ought to have more the other less; you must be prepared to say exactly how much more or less in calculable proportion.Well, think it out. The clergyman has had a college education; but that is not any merit on his part: he owns it to his father; so you cannot allow him anything for that. But through it he is able to read the New Testament in Greek; so that he can do something the blacksmith cannot do. On the other hand, the blacksmith can make a horse-shoe, which the parson cannot. How many verses of the Greek Testament are worth one horse-shoe? You have only to ask the silly question to see that nobody can answer it.Since measuring their merits is no use, why not try to measure their faults? Suppose the blacksmith swears a good deal, and gets drunk occasionally! Everybody in the village knows this; but the parson has to keep his faults to himself. His wife knows them; but she will not tell you what they are if she knows that you intend to cut off some of his pay for them. You know that as he is only a mortal human being, he must have some faults; but you cannot find them out. However, suppose he has some faults he is a snob; that he cares more for sport and fashionable society than for religion! Does that make him as bad as the blacksmith, or twice as bad, or twice and quarter as bad, or only half as bad? In other words, if the blacksmith is to have a shilling, is the parson to have six pence, or five pence and one-third, or two shillings? Clearly these are fools' questions: the moment they bring us down from moral generalities to business particulars it becomes plain to every sensible person that no relation can be established between human qualities, good or bad, and sums of money, large or small.It may seem scandalous that a prize-fighter, for hitting another prize-fighter so hard at Wembley that he fell down and could not rise within ten seconds, received the same sum that was paid to the Archbishop of Canterbury for acting as Primate of the Church of England for nine months; but none of those who cry out against the scandal can express any better in money the difference between the two. Not one of the persons who think that the prize-fighter should get less than the Archbishop can say how much less. What the prize- fighter got for his six or seven months' boxing would pay a judge's salary for two years; and we all agree that nothing could be more ridiculous, and that any system of distributing wealth which leads to such absurdities must be wrong. But to suppose that it could be changed by any possible calculation that an ounce of archbishop of three ounces of judge is worth a pound of prize-fighter would be sillier still. You can find out how many candles are worth a pound of butter in the market on any particular day; but when you try to estimate the worth of human souls the utmost you can say is that they are all of equal value before the throne of God:And that will not help you in the least to settle how much money they should have. You must simply give it up, and admit that distributing money according to merit is beyond mortal measurement and judgement.Which of the following is not a vice attributed to the poor by the rich?
....