TRADESMAN---AUTOMOBILE-MECHANIC---TECHNICAL-EDUCATION Related Question Answers

26. Idler gear is used to engage :

27. The tendancy of front wheel drive cars withunequal length of half shaft to pull to oneside during acceleration is known as :

28. Toraion bar is also known as :

29. In Macpherson type suspension system shock absorber is mounted on :

30. Leaf springs are connected to frame through shackles for-:

31. Torsion bar is attatched to:

32. Exhaust gas recirculation system is chiefly means to reduce the emission of:

33. Which of the following is not an effect of increased amount of exhaust gas recirculation?

34. The catalyst used for the reduction of NOx in three way catalytic converter is :

35. The speed of distributor cam is:

36. The dwell angle for a four cylinder engine is inthe range of:

37. The condensor in ignition system is mounted :

38. The secondary terminal of Ignition coil is connected to %:

39. Which of the following unit is used to express the capacity of condensor?

40. The specific gravity of electrolyte can be checked with :

41. Open circuit voltage of a 12V lead acid battery infully charged condition is:

42. The voltage of each cell of alkaline battery is :

43. The speed of generator at which its output voltage just rises above the voltage of battery being charged is called :

44. The purpose of brushes in alternator of automobiles is :

45. In an alternator current is induced in :

46. In starter motor the field coils are. wound around:

47. The reflector used in automobile head lamp is of:

48. The purpose of filling inert gasses inside the bulbis :

49. Metal halide type HID head lamps are popularly known as :

50. Transfer case is used in :

Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use