93251. In order to create a straight line in the AutoCAD graphics window the drafter is expected to pick a starting point and ending point.
93252. One very important tool to learn is the undo tool. It is located on the Standard Tool Bar
93253. The line tool icon is located on the Modify Tool Bar.
93254. It is very important to learn the relationship between line types, colors, and layers.
93255. AutoCAD is often referred to as the international standard by which all other CAD programs are measured.
93256. UCS stands for User Coordinate System.
93257. The two principle components of a CAD system are the computer and the software used to create technical drawings.
93258. You cannot use the Offset Tool to enlarge the size of a circle.
93259. Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
93260. A line with a tapering width can be easily created by using the ________ tool.
93261. Understanding the Cartesian coordinate system will help the beginning drafter ________.
93262. The UCS icon represents the intersection of the ________.
93263. When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
93264. One way to evenly space dimensions on a drawing is to use the ________.
93265. The ________ tool on the Dimension tool bar will place several dimensions at one time by using a selection box placed over several part features.
93266. A circular arc is dimensioned in the view where you see its true shape by giving the value for its:
93267. This is the total amount that the feature on the actual part is allowed to vary from what is specified by the dimension:
93268. The ________ dimension tool will place the length of an angled line.
93269. Placement of dimensions on a drawing is controlled by ________.
93270. Baseline dimensions are referenced from a common geometric feature known as a ________.
93271. Given a situation in which the drafter has crossed extension lines in a drawing what can be done to clean up the point of crossing?
93272. This is a thin solid line directing attention to a note or dimension and starting with an arrowhead or dot:
93273. The maximum and minimum sizes of a feature are identified by a ________ tolerance.
93274. This is a line terminated by arrowheads, indicating the direction and extent of a dimension:
93275. In U.S. structural and architectural drafting, all dimensions of this length are usually expressed in feet and inches:
93276. The inch is the commonly used unit for most metric engineering drawings.
93277. Most mechanical drawings will include tolerance information in or near the drawing title block.
93278. When designing mechanical devices, the designer must consider what the allowable variation in size between mating parts can be.
93279. Fillet radii can be given in a general note.
93280. An external cylindrical shape is dimensioned where it appears circular.
93281. Where the decimal-inch dimension is used, a zero is not used before the decimal point of values less than 1.
93282. It is always acceptable to dimension to a hidden feature.
93283. When a finished part is measured, it may vary slightly from the exact dimension specified.
93284. Tolerance issues are primarily a concern in manufacturing rather than in the design and drafting process.
93285. Dimensions are given in the form of distances, angles, and notes only when using metric units.
93286. The nominal size of a feature is the exact measurement of the feature after the tolerance has been applied to it.
93287. Drawings are usually made to a scale, which is indicated in the title block.
93288. A set of two mutually perpendicular datum planes is required for coordinate dimensioning.
93289. Although an engineer has placed dimensions in specific locations the drafter has the freedom to arrange them as he deems necessary.
93290. Typically, all dimension values and notes are lettered horizontally and should read from the bottom of the sheet.
93291. A heavy straight line should be drawn under all dimension values that are to scale.
93292. By adding dimensions to a technical drawing the drafter is providing information about the size and location of features of a part.
93293. An extension line is a thin, dark, solid line that extends from a point on the drawing to which a dimension refers.
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use
Powered By:Omega Web Solutions