1. The cast iron pipes for water supply system are used for






Write Comment

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Tags
Show Similar Question And Answers
QA->Scientific Name of Cast Iron Plant ?....
QA->14-year-old New York student who was named "America"s Top Young Scientist" for inventing a solar-powered water purification system that changes dirty water into safe drinking water?....
QA->The first book in Malayalam literature questioning the cast system and untouchability....
QA->In the following sentence, supply a verb in agreement with its subject:Neither food nor water…………….to be found there.....
QA->Steel isa form of iron. To make steel from iron, The carbon content is reduced from-....
MCQ->Consider the following statements :In water supply distribution network, 1. the grid-iron system requires more length of pipe lines and larger number of cut-off valves.2. the design of the grid-iron system is difficult but economical.3. employing a grid-iron system, the dead ends are completely eliminated.4. employing a grid-iron system permits more water to be diverted towards the affected point from various directions.Which of the statements given above are correct ?....
MCQ->A tank is fitted with pipes, some filling it and the rest draining it. All filling pipes fill at the same rate, and all draining pipes drain at the same rate. The empty tank gets completely filled in 6 hours when 6 filling and 5 draining pipes are on, but this time becomes 60 hours when 5 filling and 6 draining pipes are on. In how many hours will the empty tank get completely filled when one draining and two filling pipes are on?....
MCQ->Three pipes A, B and C are connected to a tank. These pipes can fill the tank separately in 5 hours, 10 hours and 15 hours respectively. When all the three pipes were opened simultaneously, it was observed that pipes A and B were supplying water at 3/4th of their normal rates for the first hour after which they supplied water at the normal rate. Pipe C supplied water at 2/3rd of its normal rate for first 2 hours, after which it supplied at its normal rate. In how much time, tank would be filled.....
MCQ->A tank is connected with both inlet pipes and outlet pipes. Individually, an inlet pipe can fill the tank in 7 hours and an outlet pipe can empty it in 5 hours. If all the pipes are kept open, it takes exactly 7 hours for a completely filled-in tank to empty. If the total number of pipes connected to the tank is 11, how many of these are inlet pipes?....
MCQ->Three pipes are connected to an inverted cone, with its base at the top. Two inlet pipes, A and B, are connected to the top of the cone and can fill the empty in 8 hours and 12 hours, respectively. The outlet pipe C, connected to the bottom, can empty a filled cone in 4 hours. When the cone is completely filled with water, all three pipes are opened. Two of the three pipes remain open for 20 hours continuously and the third pipe remains open for a lesser time. As a result, the height of the water inside the cone comes down to 50%. Which of the following options would be possible?....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use
DMCA.com Protection Status Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions