1. Dry water flow in a combined sewer, is





Write Comment

Type in
(Press Ctrl+g to toggle between English and the chosen language)

Comments

Tags
Show Similar Question And Answers
QA->Which gas has the nicknames of ‘Sewer gas, Stink damp and Sulfane’ ?....
QA->which river in india has the greatest flow of water....
QA->Declaringthat “blood and water cannot flow together,” Prime Minister Narendra Modidecided to abrogate Which treaty between India and Pakistan?....
QA->Free and combined chlorine in water can be determined using :....
QA->In November 2009, more than 50 employees of a nuclear plant of India were affected due to high radiation levels. A water cooler for supplying water for the employees was contaminated with tritiated water. Where is that nuclear plant?....
MCQ->In a design of storm sewers, if the time taken by rain-water to flow from the farthest point of the watershed to the sewer inlet is 'ti' and the time of flow of water from the sewer inlet to the point in the sewer that is under consideration is 'tf', then the time of concentration will be....
MCQ->In a laboratory test run, the rate of drying was found to be 0.5 x 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is....
MCQ->The following steps are involved in laying a sewer in a trench :1. Transferring the center line of the sewer to the bottom trench.2. Setting sight rails over the trench.3. Driving pegs to the level of the invert line of the sewer.4. Placing the sewer of these steps is The correct sequence of these steps is....
MCQ->At equilibrium the concentration of water in vapour phase (C)in kg/m3 of air space and the amount of water (m) adsorbed per kg of dry silica gel are related by, C = 0.0667m. To maintain dry conditions in a room of air space 100m3 containing 2.2 kg of water vapour initially, 10 kg of dry silica gel is kept in the room. The fraction of initial water remaining in the air space after a long time (during which the temperature is maintained constant) is....
MCQ->A main sewer is to be designed to receive a flow' from 1 km2 area of a community where the population density is 200 persons/ha. The average sewage flow is 150 litres per capita per day. Assume peak factor =‘,3. The design flow for the main sewer is :....
Terms And Service:We do not guarantee the accuracy of available data ..We Provide Information On Public Data.. Please consult an expert before using this data for commercial or personal use
DMCA.com Protection Status Powered By:Omega Web Solutions
© 2002-2017 Omega Education PVT LTD...Privacy | Terms And Conditions